Electric Smart Power Assist with Keypad and Lightweight Features

Description

The smart power assist gives you the freedom to do more. It moves with you and is so lightweight you don’t even know it’s there.

You can spin in place, be in a wheelie, or hop off curbs. It is compatible with your active lifestyle.

This option includes a keypad that allows you to conveniently turn the power on/off and increase/reduce speed.

The smart power assist is a lightweight conversion kit for manual wheelchairs that allows you to go up hills and ramps, over thick carpets, long distances, and essentially, anywhere where it is hard to push. It is simple and intuitive to operate. The on/off and two-speed settings can be reached when seated. The options are 2.5 – 5 km/h on low and 2.5 – 8 km/h on high. Get going yourself, and the power assist will engage within 0.5 seconds to maintain that speed. Grab your wheels to speed up or slow down/stop, and the power assist will adjust accordingly.

Smart Power Assist Benefits:

Increasing your independence

Smart Power Assist dramatically reduces the number of times you push in a day. This helps to reduce fatigue and pain in the shoulders and arms, which means you can get out and about more on your own.

Powerful

The smart power assist is surprisingly powerful. You can cruise up the steepest ramps and sidewalks. Even a thick padded hotel carpet is no problem. It even has an anti-rollback feature that allows you to stop on a hill and quickly get going again.

Easy Install

The smart power assist is lightweight and easy to install. The system weighs only 6.85kg and attaches to the back of the chair. It can be fit on any make and type of wheelchair, including folding, tilt-in-space, one-arm drive, and standing.

The battery was charged up before leaving our warehouse. When you charge the battery, please insert the charger’s output into the charging hole and then plug the input in with the alternating current. Red light means it’s on charge; green light means the charging is complete.

Frequently Asked Questions:

(general questions and not related to the product)

1- Can you add a motor to a wheelchair?

The smart power assist drive is compatible with most wheelchairs using two discrete adapters. How does it work? The electric motors integrated with the wheel hubs effectively support the wheelchair user who has to put in much less effort to travel greater distances or slopes. A giant headphone-shaped add-on fits over the wheels of any ordinary wheelchair, endowing it with an electric drive. The speed and rotation speed of the wheels can also be adjusted.

2- How do you convert a normal wheelchair to an electric one?

There are two kinds of attachments for wheelchairs; there are hand Cycles and power packs. Hand Cycles attach to the front of a manual wheelchair, and power packs attach to the back of manual wheelchairs. These manual wheelchair attachments provide an extra burst of propulsion and essentially are a set of batteries that attach to a manual wheelchair.

3- How to attach a power add-on for a manual wheelchair?

Attach, power on, pull levers and control the joystick. It’s as simple as that! If you want to handle it manually, detach the motor by releasing the levers, and then you can push the rims of your wheelchair as you would typically do.

Considerations: Load Capacity for Wheelchair?

The load capacity of a wheelchair/scooter may change according to the type of ground the wheelchair/scooter is used on.

The supplier’s stated load capacity may have been given for a product tested on flat ground.

However, the load capacity, performance, and stability may change when the product is used on an incline.

These factors, including the maximum gradient on which a wheelchair/scooter should be safely used, must be discussed with the supplier.